ISO 15632:2021
مواصفة قياسية دولية
الإصدار الحالي
·
اعتمدت بتاريخ
12 فبراير 2021
·
Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)
ملفات الوثيقة ISO 15632:2021
null صفحات
الإصدار الحالي
مجال الوثيقة ISO 15632:2021
This document defines the most important quantities that characterize an energy-dispersive X‑ray spectrometer consisting of a semiconductor detector, a pre-amplifier and a signal-processing unit as the essential parts. This document is only applicable to spectrometers with semiconductor detectors operating on the principle of solid-state ionization. This document specifies minimum requirements and how relevant instrumental performance parameters are to be checked for such spectrometers attached to a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA). The procedure used for the actual analysis is outlined in ISO 22309[2] and ASTM E1508[3] and is outside the scope of this document.
الأكثر مبيعاً
GSO 150-2:2013
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني :
فترات الصلاحية الاختيارية
BH GSO 150-2:2015
GSO 150-2:2013
مواصفة قياسية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الثاني :
فترات الصلاحية الاختيارية
BH GSO 150-1:2015
GSO 150-1:2013
لائحة فنية بحرينية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
GSO 150-1:2013
لائحة فنية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الأول : فترات الصلاحية الإلزامية
اعتمدت مؤخراً
ISO 12224-1:2024
مواصفة قياسية دولية
Solder wire, solid and flux-cored — Specification and test methods — Part 1: Classification and performance requirements
ISO 33405:2024
مواصفة قياسية دولية
Reference materials — Approaches for characterization and assessment of homogeneity and stability
ISO 33406:2024
مواصفة قياسية دولية
Approaches for the production of reference materials with qualitative properties
ISO 12224-2:2024
مواصفة قياسية دولية
Solder wire, solid and flux-cored — Specification and test methods — Part 2: Determination of flux content